Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

Hi all, Looking for some advice, I have just bought a late 04 Galaxy 1.9TDI (130). There is a problem with the heater which means that it will only work at setting 4. I have searched through the forums and it sounds like this is a resistor needing replaced?

 

One other quirk it has is that the air con button will light up when the fan setting is 1, 2 or 3 (with no air being blown), but when I turn the fan to 4 the light goes out, you get some ice cold air blowing for a few seconds then air which isnt coooled. It sounds like the aircon is maybe Ok but is this normal behaviour?

 

 

Thanks all.

Posted
you d be right on the resistor mate . you ll need to remove the glove box to access it . cant miss it , its green and needs a screw removing to get it off. id sort that first before looking at air con.
Posted

you d be right on the resistor mate . you ll need to remove the glove box to access it . cant miss it , its green and needs a screw removing to get it off. id sort that first before looking at air con.

Thanks, need to work out how to remove the glove box without busting something then.

Posted
Ok, figured it out and have the resistor out, is this a dealer only part? I'm heading of on holiday on thirst in it so would like it sorted in the next few days.
Posted
more than likely ford wont stock em as they dont make em and you ll probably pay over 40 pounds for one there . they like to stick there bit of profit on top once they ve bought em off vw. if u want my advice always go to vw for parts not ford . there cheaper and customer service is non existant at ford.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...